The ASTM A36 Carbon Low Alloy Steel Plates are medium dense with 7.85grams per centimeter cube density. The material also has high tensile strength and yield strength. The minimum yield strength of the ASME SA36 HR Plates is 250MPa and the minimum tensile strength ranges between 400 and 550MPa. The material can undergo various heat treatments. The normalizing is done above 899 degrees Celsius. There are annealing, stress relieving, carburizing and hardening processes for the ASME SA36 Structural Low Carbon Plates at different temperature levels. After the heat treatments and the processes, the material gets the necessary properties specified for ASTM A36 MS Plates. The plates are also used in agricultural equipment, construction bridges, parking garages as well. Please contact us for more information on ASME SA36 Carbon Structural Steel Plates.
Require Quotation? Send E-mail to : [email protected]
ASTM A36 Plates Materials Selection And Specification
| Specifications |
ASTM A36 / ASME SA36 |
| Length |
2000 – 12000 milimeter |
| Standard |
AISI, ASTM, BS, DIN, GB, JIS |
| Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Thickness |
0.5 – 100 milimeter |
| Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Specialize |
Shim Sheet, Perforated Sheet, B. Q. Profile. |
| Grade |
MS A36, (UNS K02600) |
| Form |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
ASTM A36 Mild Steel Plates Composition Standard
| Grade |
Mn |
C |
P |
Si |
S |
| ASTM A36 |
0.8-1.2 |
0.25 max. |
0.035 max. |
0.4 max. |
0.035 max. |
ASME Sa36 Structural Low Carbon Plate Mechanical Properties Chart
| Tensile strength |
Elongation in 2 in. [50 mm], min, % |
Yield strength |
Elongation in 8 in. [200 mm], min, % |
| 58-80 [400-550] |
23 |
36 [250] |
20 |
